Audio System / SUBWOOFER
Audio System R10 FLAT EVO: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
Published volumes include driver and port, not net air volume. Le is absent.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Published volumes include driver and port, not net air volume. Le is absent.
Documentation only — check the limitations before use.
PDF · page 2Tuning Fb: 40 Hz.
Manufacturer port: shape: round, diameter: 90 mm, length: 250 mm.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Published volumes include driver and port, not net air volume. Le is absent.
Documentation only — check the limitations before use.
PDF · page 2| Fs | 34.5 Hz |
|---|---|
| Vas | 24.9 L |
| Qes | 0.56 |
| Qms | 6.3 |
| Re | 3.6 Ω |
| Sd | 330 cm² |
| Le | Not provided / unverified |
| One-way linear Xmax | 15 mm |
| Frame diameter | 26.2 cm |
| Mounting cutout | 22.8 cm |
| Mounting depth | 8 cm |
| RMS power as published | 300 W |
|---|---|
| Nominal impedance | 4 Ω |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.