Cerwin-Vega / SUBWOOFER
Cerwin-Vega CVP10D4 — specifications and enclosures
Cerwin-Vega CVP10D4: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
Re is not imported: the table does not unambiguously specify measured DC resistance for the T/S coil configuration. Confirm electrical parameters before power simulation. The Sd table has inconsistent units or values; Sd is left blank. No separately verified enclosure preset is included. See the manufacturer PDF; calculator proposals are not manufacturer recommendations.
Manufacturer enclosure recommendations
No ready-to-load manufacturer enclosure is documented. Load the driver parameters to calculate a CarBoxLab starting design.
Calculator parameters
| Fs | 29.8 Hz |
|---|---|
| Vas | 64.05 L |
| Qes | 0.493 |
| Qms | 14.367 |
| Re | Not provided / unverified |
| Sd | Not provided / unverified |
| Le | Not provided / unverified |
| One-way linear Xmax | 8 mm |
| Frame diameter | 27.3 cm |
| Mounting cutout | 23.6 cm |
| Mounting depth | 13.4 cm |
Additional manufacturer specifications
| Published Qts | 0.477 |
|---|---|
| Nominal power | 150 W |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Source documentation
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-11-01.