Sealed 18.2 L
Follow the original manufacturer construction instructions.
Cerwin-Vega / SUBWOOFER
Cerwin-Vega HS102D — specifications and enclosures
Cerwin-Vega HS102D: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
Re is not imported: the table does not unambiguously specify measured DC resistance for the T/S coil configuration. Confirm electrical parameters before power simulation. The manual does not define the Xmax excursion convention; Xmax is shown as reference only.
Manufacturer enclosure recommendations
Calculator parameters
| Fs | 34 Hz |
|---|---|
| Vas | 23 L |
| Qes | 0.95 |
| Qms | 5 |
| Re | Not provided / unverified |
| Sd | 340 cm² |
| Le | Not provided / unverified |
| One-way linear Xmax | Not provided / unverified |
| Frame diameter | 26.79 cm |
| Mounting cutout | 23.44 cm |
| Mounting depth | 9.0 cm |
Additional manufacturer specifications
| Published Qts | 0.8 |
|---|---|
| Published Xmax (convention unconfirmed) | 7.4 mm |
| Nominal power | 200 W |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Source documentation
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-11-01.