DS18 / SUBWOOFER
DS18 ZXI8.4D: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
The PDF lists individual coil resistance without an explicit T/S measurement connection. Verify Re before electrical simulation.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: confirm net air volume after driver, port and bracing displacement before applying.
Documentation only — check the limitations before use.
PDF · page 4Tuning Fb: 35.0 Hz.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: confirm net air volume after driver, port and bracing displacement before applying.
Documentation only — check the limitations before use.
PDF · page 4| Fs | 45.0 Hz |
|---|---|
| Vas | 6.75 L |
| Qes | 0.791 |
| Qms | 5.318 |
| Re | Not provided / unverified |
| Sd | 188.69 cm² |
| Le | 0.476 mH |
| One-way linear Xmax | Not provided / unverified |
| Frame diameter | 21.8 cm |
| Mounting cutout | 18.58 cm |
| Mounting depth | 14.0 cm |
| Published Qts | 0.689 |
|---|---|
| RMS Power Handling | 600 Watts |
| Nominal Impedance | 4+4 OHMS |
| Displacement Volume | 1.02L / 0.036ft3 |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-11-01.