Sealed 2.5 L
Follow the original manufacturer construction instructions.
Gladen / SUBWOOFER
Gladen SSWX065 — specifications and enclosures
Gladen SSWX065: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
Dual voice coil: measurement wiring is not explicitly identified. Electrical simulation requires verified equivalent Re and Le. One-way linear excursion is not confirmed; no excursion limit is assumed.
Manufacturer enclosure recommendations
Sealed 4 L
Follow the original manufacturer construction instructions.
Sealed 6 L
Follow the original manufacturer construction instructions.
Bass-reflex 5 L
Manufacturer port: shape: round, diameter: 63 mm, length: 190 mm, count: 1.
Net volume excludes driver and port. The source gives port geometry but no Fb; tuning must be calculated, not treated as manufacturer-published.
Documentation only — check the limitations before use.
PDF · page 8Bass-reflex 7.5 L
Manufacturer port: shape: round, diameter: 75 mm, length: 300 mm, count: 1.
Net volume excludes driver and port. The source gives port geometry but no Fb; tuning must be calculated, not treated as manufacturer-published.
Documentation only — check the limitations before use.
PDF · page 8Bass-reflex 10 L
Manufacturer port: shape: round, diameter: 75 mm, length: 380 mm, count: 1.
Net volume excludes driver and port. The source gives port geometry but no Fb; tuning must be calculated, not treated as manufacturer-published.
Documentation only — check the limitations before use.
PDF · page 8Calculator parameters
| Fs | 52.0 Hz |
|---|---|
| Vas | 2.05 L |
| Qes | 0.49 |
| Qms | 6.29 |
| Re | Not provided / unverified |
| Sd | 126.6 cm² |
| Le | Not provided / unverified |
| One-way linear Xmax | Not provided / unverified |
| Frame diameter | 18.2 cm |
| Mounting cutout | 15.4 cm |
| Mounting depth | 12.9 cm |
Additional manufacturer specifications
| Published Qts | 0.45 |
|---|---|
| Published Xmax (definition unverified) | 11 mm |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Source documentation
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.