Gladen / SUBWOOFER
Gladen ZS10: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
Dual voice coil: measurement wiring is not explicitly identified. Electrical simulation requires verified equivalent Re and Le. One-way linear excursion is not confirmed; no excursion limit is assumed.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Manufacturer volume includes occupied driver/port space. It is not net air volume; subtract actual occupied volumes before applying. Refer to the source drawing.
Documentation only — check the limitations before use.
PDF · page 6Manufacturer port: shape: round, diameter: 70 mm, length: 260 mm, count: 1.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Manufacturer volume includes occupied driver/port space. It is not net air volume; subtract actual occupied volumes before applying. Refer to the source drawing.
Documentation only — check the limitations before use.
PDF · page 6| Fs | 26.5 Hz |
|---|---|
| Vas | 29.3 L |
| Qes | 0.86 |
| Qms | 8.8 |
| Re | Not provided / unverified |
| Sd | 312.0 cm² |
| Le | Not provided / unverified |
| One-way linear Xmax | Not provided / unverified |
| Frame diameter | 26.8 cm |
| Mounting cutout | 23.1 cm |
| Mounting depth | 14.7 cm |
| Published Qts | 0.79 |
|---|---|
| Published Xmax (definition unverified) | 11,5 mm |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.