CARBOXLAB
← All subwoofers

Ground Zero / SUBWOOFER

Ground Zero GZHW 25-D1 — specifications and enclosures

Ground Zero GZHW 25-D1: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.

Parameters use the linked manufacturer manual revision. One-way linear Xmax is not unambiguously confirmed; total excursion is not used as a simulation limit. Complete missing fields before full simulation. Re uses series-connected coils.

Read manufacturer PDF ↗Load driver

Manufacturer enclosure recommendations

Manufacturer recommendation

Sealed · 10 L net

Loads net volume. Check geometry, driver displacement and bracing. The manual limits power handling for some alignments; check manufacturer notes.

Manufacturer recommendation

Sealed · 27 L net

Loads net volume. Check geometry, driver displacement and bracing. The manual limits power handling for some alignments; check manufacturer notes.

Manufacturer recommendation

Bass-reflex · 33 L net

Manufacturer port: shape: round, diameter: 100 mm, length: 300 mm.

Published volume and port design do not unambiguously specify Fb. F3 is not tuning frequency. Reference profile; see PDF for port details. The manual limits power handling for some alignments; check manufacturer notes. Port dimensions are reference data, not a ready cutting plan.

Documentation only — check the limitations before use.

PDF · page 6

Calculator parameters

Fs40.3 Hz
Vas9.91 L
Qes0.55
Qms8.154
Re1.92 Ω
SdNot provided / unverified
LeNot provided / unverified
One-way linear XmaxNot provided / unverified
Frame diameter27.4 cm
Mounting cutout23.8 cm
Mounting depth17.8 cm

Additional manufacturer specifications

RMS power (manufacturer)1200 W
Published Qts0.515
Source revisionGZHW-25-D1-D2_OM_AWV4.0.pdf
Published excursion (not verified one-way linear Xmax)Xmax (p2p) 45 mm / 1.77” 45 mm / 1.77”
Moving mass Mms307.2 g
Force factor BL16.48 Tm
Nominal impedance2 × 1 Ω

Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.

Source documentation

Official manufacturer manual

Original manufacturer documents are not translated. Data reviewed: 2026-10-31.