CARBOXLAB
← All subwoofers

Ground Zero / SUBWOOFER

Ground Zero GZIW 10XSPL-D2 — specifications and enclosures

Ground Zero GZIW 10XSPL-D2: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.

One-way linear Xmax is unverified; no excursion limit is assumed. Sd is not published in the source table. Confirm voice-coil wiring and missing simulation parameters.

Read manufacturer PDF ↗Load driver

Manufacturer enclosure recommendations

Manufacturer recommendation

Bass-reflex 33 L

Manufacturer port: shape: round, diameter: 100 mm, length: 190 mm.

Net volume and port dimensions are documented. F3 is not tuning Fb; the manual does not give Fb for this variant, so it is reference-only.

Documentation only — check the limitations before use.

PDF · page 4

Calculator parameters

Fs36.2 Hz
Vas15.4 L
Qes0.65
Qms10.5
Re3.94 Ω
SdNot provided / unverified
Le2.96 mH
One-way linear XmaxNot provided / unverified
Frame diameter25.7 cm
Mounting cutout23 cm
Mounting depth14.7 cm

Additional manufacturer specifications

Published Qts0.61
Published Xmax (definition to verify)32 mm

Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.

Source documentation

Manufacturer technical documentation

Original manufacturer documents are not translated. Data reviewed: 2026-10-31.