CARBOXLAB
← All subwoofers

Ground Zero / SUBWOOFER

Ground Zero GZNW 15NEO-EXTREME — specifications and enclosures

Ground Zero GZNW 15NEO-EXTREME: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.

Parameters use the linked manufacturer manual revision. One-way linear Xmax is not unambiguously confirmed; total excursion is not used as a simulation limit. Complete missing fields before full simulation. Re uses series-connected coils. No ready enclosure profile: the manual does not give an unambiguous automatically applicable recommendation.

Read manufacturer PDF ↗Load driver

Manufacturer enclosure recommendations

No ready-to-load manufacturer enclosure is documented. Load the driver parameters to calculate a CarBoxLab starting design.

Calculator parameters

Fs36.6 Hz
Vas35.0 L
Qes0.18
Qms5.55
Re1.82 Ω
SdNot provided / unverified
LeNot provided / unverified
One-way linear XmaxNot provided / unverified
Frame diameter39.2 cm
Mounting cutout35.8 cm
Mounting depth30.0 cm

Additional manufacturer specifications

RMS power (manufacturer)3000 W
Published Qts0.17
Source revisionGZNW-15NEO-EXTREME_OM_AWV3.0-V2.pdf
Published excursion (not verified one-way linear Xmax)Xmax (mm / inch) 65 / 2.56
Moving mass Mms657 g
Force factor BL41.2 Tm
Nominal impedance2 × 1 Ω

Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.

Source documentation

Official manufacturer manual

Original manufacturer documents are not translated. Data reviewed: 2026-10-31.