Ground Zero / SUBWOOFER
Ground Zero GZNW 30XMAX-II: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
Parameters use the linked manufacturer manual revision. One-way linear Xmax is not unambiguously confirmed; total excursion is not used as a simulation limit. Complete missing fields before full simulation. Re uses series-connected coils.
Manufacturer port: shape: slot, width: 240 mm, height: 100 mm, length: 670 mm.
Published volume and port design do not unambiguously specify Fb. F3 is not tuning frequency. Reference profile; see PDF for port details. Port dimensions are reference data, not a ready cutting plan.
Documentation only — check the limitations before use.
PDF · page 3Manufacturer port: shape: round, diameter: 160 mm, length: 380 mm.
Published volume and port design do not unambiguously specify Fb. F3 is not tuning frequency. Reference profile; see PDF for port details. Port dimensions are reference data, not a ready cutting plan.
Documentation only — check the limitations before use.
PDF · page 3| Fs | 35.6 Hz |
|---|---|
| Vas | 13.6 L |
| Qes | 0.67 |
| Qms | 6.82 |
| Re | 1.8 Ω |
| Sd | 444.88 cm² |
| Le | 1.28 mH |
| One-way linear Xmax | Not provided / unverified |
| Frame diameter | 31.4 cm |
| Mounting cutout | 28.2 cm |
| Mounting depth | 25.0 cm |
| RMS power (manufacturer) | 3000 W |
|---|---|
| Published Qts | 0.61 |
| Source revision | GZNW-30XMAX-II_OM_AWV4.0.pdf |
| Published excursion (not verified one-way linear Xmax) | Xmax (mm / inch) 60 / 2.36 |
| Moving mass Mms | 427 g |
| Force factor BL | 16 Tm |
| Nominal impedance | 2 × 1 Ω |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.