CARBOXLAB
← All subwoofers

Ground Zero / SUBWOOFER

Ground Zero GZRW 6XSPL — specifications and enclosures

Ground Zero GZRW 6XSPL: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.

Parameters use the linked manufacturer manual revision. One-way linear Xmax is not unambiguously confirmed; total excursion is not used as a simulation limit. Complete missing fields before full simulation. Re uses series-connected coils.

Read manufacturer PDF ↗Load driver

Manufacturer enclosure recommendations

Manufacturer recommendation

Bass-reflex · 20 L net

Manufacturer port: shape: round, diameter: 70 mm, length: 450 mm.

Published volume and port design do not unambiguously specify Fb. F3 is not tuning frequency. Reference profile; see PDF for port details. Port dimensions are reference data, not a ready cutting plan.

Documentation only — check the limitations before use.

PDF · page 5
Manufacturer recommendation

Bass-reflex · 8.5 L net

Manufacturer port: shape: round, diameter: 50 mm, length: 350 mm.

Published volume and port design do not unambiguously specify Fb. F3 is not tuning frequency. Reference profile; see PDF for port details. Port dimensions are reference data, not a ready cutting plan.

Documentation only — check the limitations before use.

PDF · page 5

Calculator parameters

Fs49.5 Hz
Vas2.23 L
Qes0.621
Qms7.866
Re4.24 Ω
SdNot provided / unverified
LeNot provided / unverified
One-way linear XmaxNot provided / unverified
Frame diameter16.9 cm
Mounting cutout14.7 cm
Mounting depth9.9 cm

Additional manufacturer specifications

RMS power (manufacturer)350 W
Published Qts0.576
Source revisionGZRW-6XSPL_OM_AWV2.2.pdf
Published excursion (not verified one-way linear Xmax)Xmax (p2p) 22 mm / 0.87"
Moving mass Mms134 g
Force factor BL16.67 Tm
Nominal impedance2 × 2 Ω

Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.

Source documentation

Official manufacturer manual

Original manufacturer documents are not translated. Data reviewed: 2026-10-31.