CARBOXLAB
← All subwoofers

Ground Zero / SUBWOOFER

Ground Zero GZUW 8CF — specifications and enclosures

Ground Zero GZUW 8CF: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.

Parameters use the linked manufacturer manual revision. One-way linear Xmax is not unambiguously confirmed; total excursion is not used as a simulation limit. Complete missing fields before full simulation. Re follows the published table; confirm the T/S measurement coil wiring.

Read manufacturer PDF ↗Load driver

Manufacturer enclosure recommendations

Manufacturer recommendation

Bass-reflex · 18 L net

Manufacturer port: shape: round, diameter: 70 mm, length: 250 mm.

Published volume and port design do not unambiguously specify Fb. F3 is not tuning frequency. Reference profile; see PDF for port details. Port dimensions are reference data, not a ready cutting plan.

Documentation only — check the limitations before use.

PDF · page 3

Calculator parameters

Fs57.0 Hz
Vas4.8 L
Qes0.74
Qms11.92
Re4.1 Ω
Sd201.0 cm²
Le1.57 mH
One-way linear XmaxNot provided / unverified
Frame diameter21.5 cm
Mounting cutout18.1 cm
Mounting depth10.8 cm

Additional manufacturer specifications

RMS power (manufacturer)300 W
Published Qts0.7
Source revisionGZUW-10CF-GZUW-8CF_OM_AWV4.0.pdf
Published excursion (not verified one-way linear Xmax)Xmax (mm / inch) 20mm / 0.79 " 20mm / 0.79 "
Moving mass Mms91 g
Force factor BL13.6 Tm
Nominal impedance2 × 2 Ω

Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.

Source documentation

Official manufacturer manual

Original manufacturer documents are not translated. Data reviewed: 2026-10-31.