CARBOXLAB
← All subwoofers

Hertz / SUBWOOFER

Hertz HX 380 — specifications and enclosures

Hertz HX 380: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.

Sd calculated from manufacturer effective diameter D: π × (D/10)² / 4 cm². One-way linear Xmax is unverified; no excursion limit is assumed. Archived Hi-Energy model. Le is specified at 1 kHz.

Read manufacturer PDF ↗Load driver

Manufacturer enclosure recommendations

Manufacturer recommendation

Bass-reflex 39.42 L

Tuning Fb: 32 Hz.

The published volume is not confirmed as net air volume. Check the definition in the manual.

Published volume is not a verified net air volume. Use the original drawing and subtract occupied volumes before designing.

Documentation only — check the limitations before use.

PDF · page 5
Manufacturer recommendation

Bass-reflex 60.1 L

Tuning Fb: 31 Hz.

The published volume is not confirmed as net air volume. Check the definition in the manual.

Published volume is not a verified net air volume. Use the original drawing and subtract occupied volumes before designing.

Documentation only — check the limitations before use.

PDF · page 5

Calculator parameters

Fs30 Hz
Vas123.2 L
Qes0.62
Qms4.8
Re2.9 Ω
Sd804.25 cm²
Le1.88 mH
One-way linear XmaxNot provided / unverified
Frame diameter39.1 cm
Mounting cutout35.1 cm
Mounting depth17.4 cm

Additional manufacturer specifications

Published Qts0.55
Published Xmax (definition to verify)14 mm

Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.

Source documentation

Manufacturer technical documentation

Original manufacturer documents are not translated. Data reviewed: 2026-10-31.