Hertz / SUBWOOFER
Hertz SS 15 D2 — specifications and enclosures
Hertz SS 15 D2: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
Sd calculated from manufacturer effective diameter D: π × (D/10)² / 4 cm². One-way linear Xmax is unverified; no excursion limit is assumed. T/S values use parallel voice coils.
Manufacturer enclosure recommendations
No ready-to-load manufacturer enclosure is documented. Load the driver parameters to calculate a CarBoxLab starting design.
Calculator parameters
| Fs | 31.0 Hz |
|---|---|
| Vas | 68.83 L |
| Qes | 0.66 |
| Qms | 7.4 |
| Re | 0.96 Ω |
| Sd | 819.4 cm² |
| Le | 1.0 mH |
| One-way linear Xmax | Not provided / unverified |
| Frame diameter | 39.0 cm |
| Mounting cutout | 35.3 cm |
| Mounting depth | 18.8 cm |
Additional manufacturer specifications
| Published Qts | 0.61 |
|---|---|
| Published Xmax (definition to verify) | 15.4 mm |
| Mms | 361 g |
| Cms | 0.07 mm/N |
| BL | 10 T·m |
| Spl | 88 dB |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Source documentation
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.