HiFonics / SUBWOOFER
HiFonics ATL12D2: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
The sheet lists resistance separately for each voice coil without explicitly identifying T/S wiring. Re and Le are not imported into the electrical simulation until wiring is verified. A band-pass recommendation is also available in the PDF; it is not imported as a sealed or bass-reflex box.
Tuning Fb: 35.0 Hz.
Manufacturer port: shape: round, diameter: 100.0 mm, length: 260.0 mm, count: 1.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: the source does not establish net air volume after occupied volumes are deducted. Confirm before applying.
Documentation only — check the limitations before use.
PDF · page 1| Fs | 27.0 Hz |
|---|---|
| Vas | 44.0 L |
| Qes | 0.47 |
| Qms | 4.0 |
| Re | Not provided / unverified |
| Sd | 498.0 cm² |
| Le | Not provided / unverified |
| One-way linear Xmax | 20.0 mm |
| Frame diameter | 32.5 cm |
| Mounting cutout | 28.7 cm |
| Mounting depth | 18.4 cm |
| Published Qts | 0.42 |
|---|---|
| DC resistance per coils | 2 x 1,9 Ω |
| Published inductance (connection unverified) | 1 mH |
| RMS power | 600 W |
| Nominal impedance | 2 x 2 Ohms |
| Moving mass | 278 g |
| Force factor | 19,4 N/A |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.