HiFonics / SUBWOOFER
HiFonics ZST8D2: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
The sheet lists resistance separately for each voice coil without explicitly identifying T/S wiring. Re and Le are not imported into the electrical simulation until wiring is verified.
Tuning Fb: 39.0 Hz.
Manufacturer port: shape: round, diameter: 70.0 mm, length: 310.0 mm, count: 1.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: the source does not establish net air volume after occupied volumes are deducted. Confirm before applying.
Documentation only — check the limitations before use.
PDF · page 1The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: the source does not establish net air volume after occupied volumes are deducted. Confirm before applying. Endpoint of a published volume range.
Documentation only — check the limitations before use.
PDF · page 1The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: the source does not establish net air volume after occupied volumes are deducted. Confirm before applying. Endpoint of a published volume range.
Documentation only — check the limitations before use.
PDF · page 1| Fs | 37.4 Hz |
|---|---|
| Vas | 10.6 L |
| Qes | 0.6 |
| Qms | 7.04 |
| Re | Not provided / unverified |
| Sd | 214.0 cm² |
| Le | Not provided / unverified |
| One-way linear Xmax | 10.0 mm |
| Frame diameter | 21.4 cm |
| Mounting cutout | 18.2 cm |
| Mounting depth | 7.8 cm |
| Published Qts | 0.56 |
|---|---|
| DC resistance per coils | 2 x 1,8 Ω |
| Published inductance (connection unverified) | 2,18 mH |
| RMS power | 250 W |
| Nominal impedance | 2 x 2 Ohms |
| Moving mass | 110 g |
| Force factor | 6,6 N/A |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.