← All subwoofersHiFonics / SUBWOOFER
HiFonics ZXS8D2 — specifications and enclosures
HiFonics ZXS8D2: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
The sheet lists resistance separately for each voice coil without explicitly identifying T/S wiring. Re and Le are not imported into the electrical simulation until wiring is verified.
Manufacturer enclosure recommendations
Manufacturer recommendationSealed 9.0 L
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: the source does not establish net air volume after occupied volumes are deducted. Confirm before applying. Endpoint of a published volume range.
Documentation only — check the limitations before use.
PDF · page 1 Manufacturer recommendationSealed 15.0 L
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: the source does not establish net air volume after occupied volumes are deducted. Confirm before applying. Endpoint of a published volume range.
Documentation only — check the limitations before use.
PDF · page 1 Manufacturer recommendationBass-reflex 18.0 L
Tuning Fb: 39.0 Hz.
Manufacturer port: shape: round, diameter: 80.0 mm, length: 420.0 mm, count: 1.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference recommendation: the source does not establish net air volume after occupied volumes are deducted. Confirm before applying.
Documentation only — check the limitations before use.
PDF · page 1 Calculator parameters
| Fs | 31.3 Hz |
|---|
| Vas | 12.4 L |
|---|
| Qes | 0.51 |
|---|
| Qms | 3.25 |
|---|
| Re | Not provided / unverified |
|---|
| Sd | 202.0 cm² |
|---|
| Le | Not provided / unverified |
|---|
| One-way linear Xmax | 11.0 mm |
|---|
| Frame diameter | 21.4 cm |
|---|
| Mounting cutout | 18.2 cm |
|---|
| Mounting depth | 12.5 cm |
|---|
Additional manufacturer specifications
| Published Qts | 0.44 |
|---|
| DC resistance per coils | 2 x 2 Ω |
|---|
| RMS power | 300 W |
|---|
| Nominal impedance | 2 x 2 Ohms |
|---|
| Moving mass | 119,17 g |
|---|
| Force factor | 13,55 N/A |
|---|
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Source documentation
Manufacturer technical documentation
Manufacturer owner’s manual
Original manufacturer documents are not translated. Data reviewed: 2026-10-31.