CARBOXLAB
← All subwoofers

Massive Audio / SUBWOOFER

Massive Audio GTX 122 — specifications and enclosures

Massive Audio GTX 122: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.

The manual does not define the Xmax excursion convention; Xmax is shown as reference only. Electrical parameters use the parallel-coil column. Manufacturer box dimensions include displacement; listed volumes are retained as reference, without assuming net volume.

Read manufacturer PDF ↗Load driver

Manufacturer enclosure recommendations

Manufacturer recommendation

Sealed 26.62 L

The published volume is not confirmed as net air volume. Check the definition in the manual.

Reference recommendation: confirm net air volume after driver, port and bracing displacement before applying.

Documentation only — check the limitations before use.

PDF · page 2
Manufacturer recommendation

Sealed 33.7 L

The published volume is not confirmed as net air volume. Check the definition in the manual.

Reference recommendation: confirm net air volume after driver, port and bracing displacement before applying.

Documentation only — check the limitations before use.

PDF · page 2
Manufacturer recommendation

Bass-reflex 29.17 L

Tuning Fb: 50 Hz.

The published volume is not confirmed as net air volume. Check the definition in the manual.

Reference recommendation: confirm net air volume after driver, port and bracing displacement before applying.

Documentation only — check the limitations before use.

PDF · page 2
Manufacturer recommendation

Bass-reflex 37.66 L

Tuning Fb: 45 Hz.

The published volume is not confirmed as net air volume. Check the definition in the manual.

Reference recommendation: confirm net air volume after driver, port and bracing displacement before applying.

Documentation only — check the limitations before use.

PDF · page 2

Calculator parameters

Fs41 Hz
Vas23.2 L
Qes0.69
Qms6.43
Re0.9 Ω
Sd510 cm²
Le0.62 mH
One-way linear XmaxNot provided / unverified
Frame diameter31.1912 cm
Mounting cutout27.4066 cm
Mounting depth16.9926 cm

Additional manufacturer specifications

Published Qts0.62
Published Xmax (convention unconfirmed)15 mm
Nominal power700 W

Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.

Source documentation

Manufacturer technical documentation

Original manufacturer documents are not translated. Data reviewed: 2026-11-01.