Massive Audio / SUBWOOFER
Massive Audio SUMMO 64S: T/S parameters, mounting dimensions and manufacturer enclosure recommendations. Read the original PDF and load the driver into the 3D designer.
The manual does not define the Xmax excursion convention; Xmax is shown as reference only. T/S electrical values use the parallel-coil column. Inductance is omitted because the published magnitude/unit needs confirmation. Enclosure Qtc entries conflict with T/S values; no automatic manufacturer preset.
The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference only: the manual’s Qtc values conflict with its T/S table. Confirm the design with the manufacturer before construction.
Documentation only — check the limitations before use.
PDF · page 2The published volume is not confirmed as net air volume. Check the definition in the manual.
Reference only: the manual’s Qtc values conflict with its T/S table. Confirm the design with the manufacturer before construction.
Documentation only — check the limitations before use.
PDF · page 2| Fs | 58.45 Hz |
|---|---|
| Vas | 3.269 L |
| Qes | 0.865 |
| Qms | 4.723 |
| Re | 1.7 Ω |
| Sd | 143 cm² |
| Le | Not provided / unverified |
| One-way linear Xmax | Not provided / unverified |
| Frame diameter | 17.8562 cm |
| Mounting cutout | 15.0876 cm |
| Mounting depth | 9.8044 cm |
| Published Qts | 0.746 |
|---|---|
| Published Xmax (convention unconfirmed) | 8 mm |
| Nominal power | 200 W |
Data is for one subwoofer. Manufacturer recommendations are separate from CarBoxLab calculations. Net air volume excludes the driver, port and bracing; design dimensions are external. Loading a recommendation transfers the verified volume and tuning; confirm port geometry and construction separately.
Manufacturer technical documentation
Original manufacturer documents are not translated. Data reviewed: 2026-11-01.